Review PC2000-8 bucket, undercarriage, hydraulic and engine-related catalog entries. Begin with the registered 21T-70-33250 bucket pin and identify the installed front attachment before requesting work-equipment parts.
A sales model alone does not prove that every listed part fits every machine. Production date, serial range, engine, market specification and installed configuration can change the correct part number.
Komatsu publishes PC2000-8 as a hydraulic excavator in both backhoe and loading-shovel configurations. Its brochure lists an SAA12V140E-3 engine and separate work-equipment specifications for those configurations. The front attachment must therefore be identified before comparing bucket, linkage or cylinder requests.
For 21T-70-33250, state backhoe or loading-shovel configuration and the exact pin location. Provide the bucket or linkage assembly reference and old-part marking. Measurements can support identification but do not independently verify material or application.
Identify the affected circuit or track component and record the assembly label. Keep cylinder-seal requests separate from track-system items; include machine serial details even when an old part number is readable.
Group components by installation position and list quantities individually. Include destination and the required delivery window. Confirm the quoted item and configuration before arranging a service shutdown; this page does not promise current stock or delivery time.
Machine references support the statements above, not individual part fitment. Prepared by Danch Machinery · Reviewed 2026-09-10.
These are registered catalog associations. Each part requires a machine and serial-number check before ordering.
| Part number | Registered product | Application status |
|---|---|---|
| 21T-70-33250 | 21T-70-33250 Bucket Pin for Komatsu PC2000-8 | Pending serial-number verification |
| 198-06-73171 | Komatsu 198-06-73171 Insulator | Pending serial-number verification |
| 198-06-73180 | Komatsu 198-06-73180 Starter | Pending serial-number verification |
| 707-99-78450 | Komatsu 707-99-78450 Hydraulic Cylinder Repair Kit | Pending serial-number verification |
| 600-645-7450 | Komatsu 600-645-7450 Fan | Pending serial-number verification |
Komatsu publishes separate work-equipment specifications for the two versions. Do not assume bucket, linkage or cylinder components are shared; identify the actual configuration and assembly.
No. Product identity evidence is recorded, but the PC2000-8 link is a registered association awaiting application verification. Send the serial plate and exact bucket-pin position.
Send the machine plate, front attachment, pin location, old pin marking and any bucket or linkage assembly label. Include an existing parts-catalog reference if available.
These are general guides, not a model-specific service manual.
These links describe how currently associated products are organized. They do not replace product-level model and serial verification.
Only product-to-model records supported by active internal evidence appear in this table.
Products may still be shown below as current catalog associations, but none are presented here as verified fitment until supporting evidence is reviewed.
Open a product page to review its part number, images and current verification status.
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →
Model association: Komatsu PC2000-8. Confirm the complete serial number and configuration before ordering.
Review product →Use the current manufacturer manual and qualified technical personnel for procedures, limits and safety decisions.
Record the full model, complete serial number, engine model and market or configuration suffix from the nameplate.
Provide the old part number, packaging label, installed position and clear photos. Do not rely on appearance alone.
Include operating hours, warning codes, leakage or damage location, recent service work and relevant measurements.
For bucket-linkage play, identify the exact joint and record the pin, bushing and surrounding assembly separately. A visible gap does…
Read guidance →
Confirm fitment by connecting an exact part number to the machine model, complete serial number and relevant configuration through documented…
Read guidance →Send the part number, complete serial number, nameplate and product photos for review.
Send the part number, machine model and photos. We will cross-check the application and reply within 24 hours.
